Features

• Continuous mixing, spraying and pumping of pre-blended cementitious and gypsum based mortars, stucco, fireproofing, self-leveling underlayments and grouts
• Single-phase 3 HPmotor with turboboost to 5 HP
• 6 speed settings deliverup to 120, 50lb bags perhour
• Use in wet or drymode depending onyour needs
• Air compressor-ready
• 100% duty cyclemotors can run all daylong
• Inverter technologybalances the powerand monitors theelectricity for maximumperformance
• Add the optionalcompressor to mixand spray 16 bags offireproofing per hour
• Includes:
  • D8 – 1.5 stator and rotor w/tab
  • Turbo mixer kit with material delivery pressure gauge
  • Gear-driven feed impeller
  • Control panel w/ exclusive IMER 6-speed inverter
  • Self-priming water booster pump
  • Water system with flow meter and drainage valves
  • 66′ power cord
  • 3/4″ (19 mm) x 66′ water hose
  • 1″ (25 mm) x 50′ material hose
  • 1-3/8″ (35 mm) – 1″ (25 mm) reducer
  • Hose cleaning kit with toolbox
  • Mixing chamber clean out tool

Details

The Koine 3.1 is designed to be a continuous pump for feeding bags of dry material such as underlayment, mortar or grouts. But when you need to mix the material with lots of additives which require longer mixing times then switch to wet mode, use a separate mixer such as the Mix 120 and pour it into the hopper to use it as just a pump. This gives the flexibility and versatility to be used for any application. Rinse out the hopper when finished.